Vesco Plastics Australia Pty Ltd Phone : +61 (03) 9796 4098
3 Carl Court, Hallam, Victoria 3803
Fax: +61 (03) 9796 4180
robert@vesco.com.au
Click here for a free CD!





















Vesconite Industrial Design-a-Bearing Calculator Imperial

Housing diameter

   inches

 

Shaft diameter   inches
Bearing length   inches
Press Fit?  
Maximum operating temp   °F
Minimum operating temp   °F
Total mass supported   lbs
Number of bearings
supporting total mass		  
Rotation Oscillation  Linear
rpm degrees inches travelled
cycles per minute cycles per minute
Scroll down for results ê    ê   Drawing included below  ê
 

 Outside Dia inches ±    Inside Dia inches ±    Length +0.0/-

Loading P =

   psi

Shaft surface speed  V =

   inches/min

PV =

  

psi-inc/
min

Expansion gap

   inches
Interference fit   inches  
Bore closure   inches
Additional clearance   inches
Assembled clearance   inches
Fitted inside diameter   inches  
Press fit force   lbs
OD after cooling with dry ice   inches
 OD after cooling with liquid nitrogen   inches
       
Free Standing Bearing (Not to Scale)
Material : Vesconite

Length         

  +0.0/- inches
Outside Diameter
 +/- inches





Inside Diameter
 +/- inches



Wall Thickness inches
+0.0/-

Expansion gap inches   
  
Housing inches    

Size adjustment for various machining temperatures

Bearing temp

 OD inches ID inches
40-50 °F

50-60 °F
60-70 °F
70-86 °F
86-95 °F
95-104 °F

Shaft inches

Maximum operating temp °F

Minimum operating temp °F

Date   

Enquiries

For all enquiries, please contact Vesco Plastics.

Vesco Plastics Australia Pty Ltd Phone : +61 (03) 9796 4098
3 Carl Court, Hallam, Victoria 3803
Fax: +61 (03) 9796 4180
albert@vesco.com.au

Back